Enables two-way half duplex wireless data transmission over a range of 500m. It integrates a 10-channel radio transceiver, a digital processing unit and a wide power supply range on the same board. It is available in an IP65 enclosure ready for approved use. It uses the 433/434 MHz band according to the European Directive RTTE EN300-200/EN301-489. Data transfer is performed via an RS232 serial port and configuration is performed by AT commands.

It is suitable for short distance wireless data transmission.

Applications

• Point-to-Point data transfer
• Wireless local multi-channel networks
• Remote management
• Automation
• Robotics

Adeunis RF

ARF33 Data Modem

Enables two-way half duplex wireless data transmission over a range of 6000m. It integrates a multi-channel radio transceiver, a digital processing unit and a wide power supply range on the same board. It is available in an IP65 enclosure ready for approved use with integrated or remote antenna. It uses the 869MHz / 500mW band according to the European Directive RTTE EN300-200/EN301-489. Data transfer is performed via an RS232 / RS485 serial port and configuration is performed by serial commands. It can be used without a license and It is suitable for long distance wireless data transmission applications.

Applications

• Point-to-Point data transfer
• Wireless local multi-channel networks
• Remote management
• Automation
• Robotics

Adeunis RF

ARF35 Data Modem

Enables two-way half duplex wireless data transmission over a range of 1500m. It integrates a multi-channel radio transceiver, a digital processing unit and a wide power supply range on the same board. It is available in an IP65 enclosure ready for approved use with integrated or remote antenna. It uses the 863/870MHz band according to the European Directive RTTE EN300-200/EN301-489. Data transfer is performed via an RS232 / RS485 serial port or USB interface and configuration is performed by AT commands. It can be used without a license and It is suitable for middle distance wireless data transmission applications.

Applications

• Point-to-Point data transfer
• Wireless local multi-channel networks
• Remote management
• Automation
• Robotics

Adeunis RF

ARF43 Data Modem

Enables two-way half duplex wireless data transmission over a range of 6000m. It integrates a multi-channel radio transceiver, a digital processing unit and a wide power supply range on the same board. It is available in an IP65 enclosure ready for approved use. It uses the 869MHz band according to the European Directive RTTE EN300-200/EN301-489. Data transfer is performed via an RS232 / RS485 serial port or USB inetrface and configuration is performed by AT commands. It can be used without a license and It is suitable for long distance wireless data transmission applications.

Applications

• Point-to-Point data transfer
• Wireless local multi-channel networks
• Remote management
• Automation
• Robotics
• Display command

Adeunis RF

ARF53 Data Modem

Professional UHF Radio Modem for applications covering very long distance in harsh environments.

With power of up to 4W and sensitivity of -117dBm the ARF73 UHF Radio Modem covers distances of up to 50km with the enclosed standard antenna.

Consequently it is ideally suited for :

• Applications requiring a really long distance transmission
• Communication under difficult conditions
• Applications requiring a secure radio link

The modem allows you to benefit from the advantages of professional licensed radio (confidential and secure) for a very low cost.


The highly reliable radio link makes it a perfect device for critical communications that must not rely on the availability of a GSM network.

• A licensed professional band from 400 to 470MHz
• Frequency stability : +/- 1kHz
• Improved automatic frequency correction calculation (up to 3kHz)
• 16 pre-programmed channels
• An output power selectable via software : 0.5W (27dBm) / 2W (33dBm) / 4W (36dBm)
• Sensitivity : -117dBm
• Channel spacing : 12kHz (25kHz on request)
• Air rate : 4,800 / 7,680 / 9,600 bits/s
• RS232 and RS422 in transparent mode
• IP65 Housing
• Authorisation for Europe

Adeunis RF

ARF73 UHF Radio Modem

ConnexLINK is the most flexible, affordable RF serial data device available for both customers and OEMs. The system can be set up in minutes to enable local-area communication in industrial, commercial and office applications.

Because it uses frequency-hopping spread spectrum technology, it provides reliable communication at up to 115.2 Kbps even in RF-hostile environments. ConnexLINK's industrial-grade enclosure contains a robust 2.4 GHz or 900 MHz transceiver. Each ConnexLINK communication system requires a central server node and any number remote client nodes that operate in point-to-point or point-to-multipoint configurations. Users can create multiple sub0networks by assigning unique radio addresses to specific device groups.

Aerocomm

ConnexLINK

ConnexModem is a powerful 2.4 GHz radio transceiver combined with a 56K data/fax modem. The system can be set up in minutes to enable wireless communication between local RS232 devices and any standard phone line.

Proprietary FHSS technology ensures reliable, secure transmissions even in RF-hostile environments.

The ConnexModem system comprise of a remote node (ConnexPC, which enables local wireless data transmissions) and a telecom node (ConnexModem, which bridges the local wireless link to a telecom system for longer range communication).
Each industrial-grade device utilises an industry-standard interface: the ConnexModem attached to an RJ11 phone jack while the ConnexPC connects to a DB9 RS232 serial port. Both support point-to-point configuration at baud rates up to 115.2 Kbps.

Aerocomm

ConnexModem